Construction Training in NYC, New York

The OSHA training for Construction Safety & Health is a requirement by the NYC Dept. of Buildings for ALL persons who are working on active construction sites in The Five Boroughs. These courses are designed to educate personal from Site Managers, Site Supervisors to laborers and other sub-contracting trades; on identifying, removing or replacing...

This one-half day refresher course is required for all accredited operations & maintenance workers who wish to extend their accreditation for a one-year period. Course Content: Review federal and state regulations Review decontamination systems Case studies

NYC Local Law 52 requires all individuals who use a supported scaffold, including the person supervising such, to complete (at minimum) 4-hours of training by a Dept. of Buildings-approved training provider. This course must be repeated every four years. Course content includes: Introduction to Supported Scaffolds Review of Supported Scaffold...

This course, which was developed by the U.S. Dept. of Labor, is designed to introduce workers to OSHA, inform workers of their rights under the OSH Act of 1970, and familiarize workers with some of the health and safety standards contained in 29 CFR 1926 OSHA: Construction Industry Regulations. Course content includes: Introduction to OSHA Review...

Full Course Name:  MOLD Refresher Spanish (Assessor, Remediation Contractor, Abatement Worker Supervisor, Abatement Worker) - 607 The 4 Hour Mold Refresher Spanish course is required every two years to renew New York State Mold Licenses (Assessor, Remediation Contractor, Abatement Worker Supervisor, Abatement Worker).  Upon successful...

Students who attend Flagger Awareness Training with All NYC Safety will learn OSHA standards under CFR 29 1926 Subpart G, regulations under Manual of Uniform Traffic Control Devices (MUTCD), PPE requirements for flaggers, and techniques to safely control and direct traffic around construction activities. This course is taught by an OSHA-authorized...

Mold Abatement Worker is a 2 day course and is required for workers that perform any type of mold abatement work in any capacity and are employed by a licensed mold remediation contractor. New York State regulations require individuals performing mold abatement to be trained as a Mold Abatement worker by an accredited training program.   Upon...

This one-half refresher day course is required for all accredited allied trades workers who wish to extend their accreditation for a one year period. Course Content: Review federal and state regulations Review decontamination systems Case studies  Additional Fees: NY State Department of Labor License Fee: $50 NYC DEP License Fee: $50...

The 40-Hour Site Safety Manager course is for construction professionals applying to take the Site Safety Manager exam or registering with the NYC Department of Buildings as a Site Safety Coordinator or Registered Construction Superintendent. This course is required by NYC Department of Buildings before taking the written examination for a New York...

The 5 day Combo course is for individuals that will perform Mold inspection and Remediation. Course topics will cover hazard assessment and mold remediation plans. This course will lead to a certification in Mold Assessor and Mold Remediation Contractor (two separate certifications). New York State regulations require any individual performing mold...

This course is a requirement for an individual - who is not a licensed rigger or a designated foreman of a licensed rigger – to supervise the hoisting or lowering of articles on the outside of a building with hoisting equipment. In lieu of completing this course, an individual may instead possess a Department Approved National  Rigging Certification....

The DOT Flagger Course is a requirement by the NYS Dept. of Transit for ALL (NYSDOT) employees, utility companies, municipalities, and contractors who are involved with the design, set-up and maintenance of highway work zones, or anyone working within the state right-of-way in The Five Boroughs. Topics Include: Personal Protective Equipment, Work...

Contractors who perform renovation, repairs, and painting must train and re-certify in lead-safe work practices before renovating older housing.  New certification is required for all home improvement activity that disturbs more than 6 square feet of interior or 20 square feet of exterior lead paint in housing built before 1978, and in any child-occupied...

Mold Remediation Contractor course is a 3 day course that is required for contractors who perform mold remediation work. New York State regulations require contractors who operate a company that performs mold remediation services or write/approve mold remediation work plans to have a mold remediation contractor license from an accredited training...

Mold Assessor is a 4 day course required for professionals who will perform mold assessment and will design and write remediation plans for mold abatement. New York State regulations require any individual performing mold assessment to attend an accredited mold assessor training program.   Upon successful completion of the course, student will...